- Compatible control signal, no need serial resistor. Operational votlage 3.3-24V
- Based on TB6600 Drive IC
- DC9-42V power supply, better use 12-24V
- Micro-step 1-32 division selectable.
- Dual H-bridge constant current drive
- 4A peak current
- Over-heat, over-current protection, nosieless optmized
- Best for Nema 17 (42mm) or 57mm steppers.
- Documentation please see on this page. (dimension, wiring, datasheet). Demo video avaialble here.
- Configuration directly printed on case, including division setup and current setup.
The post TB6600 Stepper Drive Mstep-32, 4A, 42VDC appeared first on ElectroDragon.